MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 20.0 Shank diameter (d2)
- 3xD Drilling depth xD
- 6xD Drilling depth xD
- 25.0 Drilling depth xD
- MEGA-180°-Drill family
-
Diameter (d1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(5)
(5)
(5)-
MEGA-180°-Drill
d1: 18,5 mm; d2: 20 mm; l1: 129 mm; l2: 77 mm; l3: 53 mm; z: 2; internal cooling; SCD231-1850-2-4-180HA03-HP230
Order number: 30382758
In Stock -
MEGA-180°-Drill
d1: 18,8 mm; d2: 20 mm; l1: 129 mm; l2: 77 mm; l3: 53 mm; z: 2; internal cooling; SCD231-1880-2-4-180HA03-HP230
Order number: 30382759
In Stock -
MEGA-180°-Drill
d1: 19 mm; d2: 20 mm; l1: 129 mm; l2: 77 mm; l3: 53 mm; z: 2; internal cooling; SCD231-1900-2-4-180HA03-HP230
Order number: 30382760
In Stock -
MEGA-180°-Drill
d1: 19,5 mm; d2: 20 mm; l1: 129 mm; l2: 77 mm; l3: 53 mm; z: 2; internal cooling; SCD231-1950-2-4-180HA03-HP230
Order number: 30382761
In Stock -
MEGA-180°-Drill
d1: 20 mm; d2: 20 mm; l1: 129 mm; l2: 77 mm; l3: 53 mm; z: 2; internal cooling; SCD231-2000-2-4-180HA03-HP230
Order number: 30382763
In Stock
