MEGA-Drill-Inox
In addition to its very sharp cutting edge with special cutting edge preparation, the MEGA-Drill-Inox has an optimised chip chamber with a rounded geometry.
Selected facets:
- 20.0 Shank diameter (d2)
- 25.0 Drilling depth xD
- 16.0 Shank diameter (d2)
- 4xD Drilling depth xD
- 3xD Drilling depth xD
- MEGA-Drill-Inox family
-
Product Family
-
Diameter (d1)
-
-
Number of cutting edges (z)
-
Tip angle
-
Product category
-
Bore tolerance
(9)
(9)
(9)
(9)
(9)-
MEGA-Drill-Inox
d1: 14,5 mm; d2: 16 mm; l1: 115 mm; l2: 65 mm; l3: 45 mm; z: 2 ; internal cooling; SCD121-1450-2-2-140HA03-HP835
Order number: 30390615
In Stock -
MEGA-Drill-Inox
d1: 15 mm; d2: 16 mm; l1: 115 mm; l2: 65 mm; l3: 45 mm; z: 2 ; external cooling; SCD120-1500-2-2-140HA03-HP835
Order number: 30390406
In Stock -
MEGA-Drill-Inox
d1: 15 mm; d2: 16 mm; l1: 115 mm; l2: 65 mm; l3: 45 mm; z: 2 ; internal cooling; SCD121-1500-2-2-140HA03-HP835
Order number: 30390616
In Stock -
MEGA-Drill-Inox
d1: 15,5 mm; d2: 16 mm; l1: 115 mm; l2: 65 mm; l3: 45 mm; z: 2 ; internal cooling; SCD121-1550-2-2-140HA03-HP835
Order number: 30442531
In Stock -
MEGA-Drill-Inox
d1: 15,8 mm; d2: 16 mm; l1: 115 mm; l2: 65 mm; l3: 45 mm; z: 2 ; internal cooling; SCD121-1580-2-2-140HA03-HP835
Order number: 30445995
In Stock -
MEGA-Drill-Inox
d1: 16 mm; d2: 16 mm; l1: 115 mm; l2: 65 mm; l3: 45 mm; z: 2 ; internal cooling; SCD121-1600-2-2-140HA03-HP835
Order number: 30390617
In Stock -
MEGA-Drill-Inox
d1: 16 mm; d2: 16 mm; l1: 115 mm; l2: 65 mm; l3: 45 mm; z: 2 ; external cooling; SCD120-1600-2-2-140HA03-HP835
Order number: 30390408
In Stock -
MEGA-Drill-Inox
d1: 19 mm; d2: 20 mm; l1: 131 mm; l2: 79 mm; l3: 55 mm; z: 2 ; external cooling; SCD120-1900-2-2-140HA03-HP835
Order number: 30390414
In Stock -
MEGA-Drill-Inox
d1: 20 mm; d2: 20 mm; l1: 131 mm; l2: 79 mm; l3: 55 mm; z: 2 ; internal cooling; SCD121-2000-2-2-140HA03-HP835
Order number: 30390625
In Stock
