Tritan-Drill-Alu
MAPAL has developed the Tritan Drill Alu especially for the high-feed machining of aluminium. The three-edged solid carbide drill has a coordinated, finely ground groove profile. Large chip spaces and a special, sharp cutting edge preparation ensure optimum chip formation, reduce heat build-up and ensure the reliable removal of the chips. The special drill tip of the Tritan-Drill-Alu enables drilling on uneven and critical surfaces as well as safe centering.
Selected facets:
- 18.0 Shank diameter (d2)
- 25.0 Drilling depth xD
- 5xD Drilling depth xD
- 12.0 Shank diameter (d2)
- Tritan-Drill-Alu family
-
Material charateristics
-
Diameter (d1)
-
-
Drilling depth xD
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(6)-
Tritan-Drill-Alu
d1: 10,2 mm; d2: 12 mm; l1: 118 mm; l2: 71 mm; l3: 56 mm; z: 3, internal cooling, SCD681-1020-3-3-130HA05-HU318
Order number: 31307650
In Stock -
Tritan-Drill-Alu
d1: 10,5 mm; d2: 12 mm; l1: 118 mm; l2: 71 mm; l3: 56 mm; z: 3, internal cooling, SCD681-1050-3-3-130HA05-HU318
Order number: 31307651
In Stock -
Tritan-Drill-Alu
d1: 11 mm; d2: 12 mm; l1: 118 mm; l2: 71 mm; l3: 56 mm; z: 3, internal cooling, SCD681-1100-3-3-130HA05-HU318
Order number: 31307652
In Stock -
Tritan-Drill-Alu
d1: 11,5 mm; d2: 12 mm; l1: 118 mm; l2: 71 mm; l3: 56 mm; z: 3, internal cooling, SCD681-1150-3-3-130HA05-HU318
Order number: 31307653
In Stock -
Tritan-Drill-Alu
d1: 11,8 mm; d2: 12 mm; l1: 118 mm; l2: 71 mm; l3: 56 mm; z: 3, internal cooling, SCD681-1180-3-3-130HA05-HU318
Order number: 31307654
In Stock -
Tritan-Drill-Alu
d1: 12 mm; d2: 12 mm; l1: 118 mm; l2: 71 mm; l3: 56 mm; z: 3, internal cooling, SCD681-1200-3-3-130HA05-HU318
Order number: 31307655
In Stock
