MEGA-180°-Drill-Alu
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 16.0 Shank diameter (d2)
- 12.0 Shank diameter (d2)
- 12xD Drilling depth xD
- 5xD Drilling depth xD
- 3xD Drilling depth xD
- MEGA-180°-Drill-Alu family
-
Material charateristics
-
Diameter (d1)
-
-
Drilling depth (l3)
-
-
Total length (l1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(5)-
MEGA-180°-Drill-Alu
d1: 11 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2 ; internal cooling; SCD241-1100-2-4-180HA03-HU630
Order number: 30382965
In Stock -
MEGA-180°-Drill-Alu
d1: 12 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2 ; internal cooling; SCD241-1200-2-4-180HA03-HU630
Order number: 30382975
In Stock -
MEGA-180°-Drill-Alu
d1: 12 mm; d2: 12 mm; l1: 116 mm; l2: 69 mm; l3: 54 mm; z: 2; internal cooling; SCD241-1200-2-4-180HA05-HU630
Order number: 30383093
In Stock -
MEGA-180°-Drill-Alu
d1: 14,5 mm; d2: 16 mm; l1: 113 mm; l2: 63 mm; l3: 43 mm; z: 2 ; internal cooling; SCD241-1450-2-4-180HA03-HU630
Order number: 30382982
In Stock -
MEGA-180°-Drill-Alu
d1: 15 mm; d2: 16 mm; l1: 131 mm; l2: 81 mm; l3: 61 mm; z: 2; internal cooling; SCD241-1500-2-4-180HA05-HU630
Order number: 30383102
In Stock
