MEGA-180°-Drill-Alu
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Ausgewählte Filter:
- 16.0 Shank diameter (d2)
- 5xD Drilling depth xD
- 8xD Drilling depth xD
- 12.0 Shank diameter (d2)
- MEGA-180°-Drill-Alu family
- 14.0 Shank diameter (d2)
-
Product Family
-
Material charateristics
-
Diameter (d1)
-
-
Number of cutting edges (z)
-
Cooling
-
Tip angle
-
Product category
-
Bore tolerance
(4)-
MEGA-180°-Drill-Alu
d1: 12 mm; d2: 12 mm; l1: 116 mm; l2: 69 mm; l3: 54 mm; z: 2; internal cooling; SCD241-1200-2-4-180HA05-HU630
Bestellnummer: 30383093
sofort lieferbar -
MEGA-180°-Drill-Alu
d1: 13 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD241-1300-2-4-180HA05-HU630
Bestellnummer: 30383096
sofort lieferbar -
MEGA-180°-Drill-Alu
d1: 14 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD241-1400-2-4-180HA05-HU630
Bestellnummer: 30383099
sofort lieferbar -
MEGA-180°-Drill-Alu
d1: 15 mm; d2: 16 mm; l1: 131 mm; l2: 81 mm; l3: 61 mm; z: 2; internal cooling; SCD241-1500-2-4-180HA05-HU630
Bestellnummer: 30383102
sofort lieferbar
