MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 14.0 Shank diameter (d2)
- 8xD Drilling depth xD
- 16.0 Shank diameter (d2)
- 3xD Drilling depth xD
- MEGA-180°-Drill family
-
Diameter (d1)
-
-
Drilling depth (l3)
-
-
Total length (l1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(11)
(11)
(11)-
MEGA-180°-Drill
d1: 12,5 mm; d2: 14 mm; l1: 105 mm; l2: 58 mm; l3: 41 mm; z: 2; internal cooling; SCD231-1250-2-4-180HA03-HP230
Order number: 30382740
In Stock -
MEGA-180°-Drill
d1: 12,7 mm; d2: 14 mm; l1: 105 mm; l2: 58 mm; l3: 41 mm; z: 2; internal cooling; SCD231-1270-2-4-180HA03-HP230
Order number: 30852019
In Stock -
MEGA-180°-Drill
d1: 12,8 mm; d2: 14 mm; l1: 105 mm; l2: 58 mm; l3: 41 mm; z: 2; internal cooling; SCD231-1280-2-4-180HA03-HP230
Order number: 30382741
In Stock -
MEGA-180°-Drill
d1: 13 mm; d2: 14 mm; l1: 105 mm; l2: 58 mm; l3: 41 mm; z: 2; internal cooling; SCD231-1300-2-4-180HA03-HP230
Order number: 30382742
In Stock -
MEGA-180°-Drill
d1: 13,5 mm; d2: 14 mm; l1: 105 mm; l2: 58 mm; l3: 41 mm; z: 2; internal cooling; SCD231-1350-2-4-180HA03-HP230
Order number: 30382743
In Stock -
MEGA-180°-Drill
d1: 13,8 mm; d2: 14 mm; l1: 105 mm; l2: 58 mm; l3: 41 mm; z: 2; internal cooling; SCD231-1380-2-4-180HA03-HP230
Order number: 30382744
In Stock -
MEGA-180°-Drill
d1: 14 mm; d2: 14 mm; l1: 105 mm; l2: 58 mm; l3: 41 mm; z: 2; internal cooling; SCD231-1400-2-4-180HA03-HP230
Order number: 30382745
In Stock -
MEGA-180°-Drill
d1: 14,5 mm; d2: 16 mm; l1: 113 mm; l2: 63 mm; l3: 43 mm; z: 2; internal cooling; SCD231-1450-2-4-180HA03-HP230
Order number: 30382746
In Stock -
MEGA-180°-Drill
d1: 15 mm; d2: 16 mm; l1: 113 mm; l2: 63 mm; l3: 43 mm; z: 2; internal cooling; SCD231-1500-2-4-180HA03-HP230
Order number: 30382748
In Stock -
MEGA-180°-Drill
d1: 15,8 mm; d2: 16 mm; l1: 113 mm; l2: 63 mm; l3: 43 mm; z: 2; internal cooling; SCD231-1580-2-4-180HA03-HP230
Order number: 30382750
In Stock -
MEGA-180°-Drill
d1: 16 mm; d2: 16 mm; l1: 113 mm; l2: 63 mm; l3: 43 mm; z: 2; internal cooling; SCD231-1600-2-4-180HA03-HP230
Order number: 30382751
In Stock
