MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 8xD Drilling depth xD
- 5xD Drilling depth xD
- 30xD Drilling depth xD
- 14.0 Shank diameter (d2)
- MEGA-180°-Drill family
-
Diameter (d1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
-
MEGA-180°-Drill
d1: 12,5 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD231-1250-2-4-180HA05-HP230
Order number: 30382859
In Stock -
MEGA-180°-Drill
d1: 12,8 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD231-1280-2-4-180HA05-HP230
Order number: 30382860
In Stock -
MEGA-180°-Drill
d1: 13 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD231-1300-2-4-180HA05-HP230
Order number: 30382861
In Stock -
MEGA-180°-Drill
d1: 13,5 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD231-1350-2-4-180HA05-HP230
Order number: 30382862
In Stock -
MEGA-180°-Drill
d1: 13,8 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD231-1380-2-4-180HA05-HP230
Order number: 30382863
In Stock -
MEGA-180°-Drill
d1: 14 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD231-1400-2-4-180HA05-HP230
Order number: 30382864
In Stock