MEGA-Drill-Inox
In addition to its very sharp cutting edge with special cutting edge preparation, the MEGA-Drill-Inox has an optimised chip chamber with a rounded geometry.
Selected facets:
- 8xD Drilling depth xD
- 40xD Drilling depth xD
- 20.0 Shank diameter (d2)
- MEGA-Drill-Inox family
- 10.0 Shank diameter (d2)
-
Diameter (d1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
-
MEGA-Drill-Inox
d1: 8,5 mm; d2: 10 mm; l1: 142 mm; l2: 95 mm; l3: 80 mm; z: 2 ; internal cooling; SCD121-0850-2-2-140HA08-HP835
Order number: 30391227
In Stock -
MEGA-Drill-Inox
d1: 8,9 mm; d2: 10 mm; l1: 142 mm; l2: 95 mm; l3: 80 mm; z: 2 ; internal cooling; SCD121-0890-2-2-140HA08-HP835
Order number: 30391231
In Stock -
MEGA-Drill-Inox
d1: 9 mm; d2: 10 mm; l1: 142 mm; l2: 95 mm; l3: 80 mm; z: 2 ; internal cooling; SCD121-0900-2-2-140HA08-HP835
Order number: 30391232
In Stock -
MEGA-Drill-Inox
d1: 9,1 mm; d2: 10 mm; l1: 142 mm; l2: 95 mm; l3: 80 mm; z: 2 ; internal cooling; SCD121-0910-2-2-140HA08-HP835
Order number: 30391233
In Stock -
MEGA-Drill-Inox
d1: 9,3 mm; d2: 10 mm; l1: 142 mm; l2: 95 mm; l3: 80 mm; z: 2 ; internal cooling; SCD121-0930-2-2-140HA08-HP835
Order number: 30391235
In Stock -
MEGA-Drill-Inox
d1: 9,5 mm; d2: 10 mm; l1: 142 mm; l2: 95 mm; l3: 80 mm; z: 2 ; internal cooling; SCD121-0950-2-2-140HA08-HP835
Order number: 30391237
In Stock -
MEGA-Drill-Inox
d1: 9,6 mm; d2: 10 mm; l1: 142 mm; l2: 95 mm; l3: 80 mm; z: 2 ; internal cooling; SCD121-0960-2-2-140HA08-HP835
Order number: 30391238
In Stock -
MEGA-Drill-Inox
d1: 9,7 mm; d2: 10 mm; l1: 142 mm; l2: 95 mm; l3: 80 mm; z: 2 ; internal cooling; SCD121-0970-2-2-140HA08-HP835
Order number: 30391239
In Stock -
MEGA-Drill-Inox
d1: 9,8 mm; d2: 10 mm; l1: 142 mm; l2: 95 mm; l3: 80 mm; z: 2 ; internal cooling; SCD121-0980-2-2-140HA08-HP835
Order number: 30391240
In Stock -
MEGA-Drill-Inox
d1: 10 mm; d2: 10 mm; l1: 142 mm; l2: 95 mm; l3: 80 mm; z: 2 ; internal cooling; SCD121-1000-2-2-140HA08-HP835
Order number: 30391242
In Stock