MEGA-180°-Drill-Alu
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
Remove all filters-
Material charateristics
-
Diameter (d1)
-
-
Schneidenanzahl (z)
-
Kühlmittelzufuhr
-
Produktfamilie
-
Produktklasse
-
Bohrungstoleranz
(6)-
MEGA-180°-Drill-Alu
d1: 8,5 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2 ; internal cooling; SCD241-0850-2-4-180HA03-HU630
Order number: 30382940
In Stock -
MEGA-180°-Drill-Alu
d1: 8,9 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2 ; internal cooling; SCD241-0890-2-4-180HA03-HU630
Order number: 30382944
In Stock -
MEGA-180°-Drill-Alu
d1: 9 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2 ; internal cooling; SCD241-0900-2-4-180HA03-HU630
Order number: 30382945
In Stock -
MEGA-180°-Drill-Alu
d1: 9,2 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2 ; internal cooling; SCD241-0920-2-4-180HA03-HU630
Order number: 30382947
In Stock -
MEGA-180°-Drill-Alu
d1: 9,8 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2 ; internal cooling; SCD241-0980-2-4-180HA03-HU630
Order number: 30382953
In Stock -
MEGA-180°-Drill-Alu
d1: 10 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2 ; internal cooling; SCD241-1000-2-4-180HA03-HU630
Order number: 30382955
In Stock
