MEGA-Speed-Drill-Inox
The cutting edges of the MEGA-Speed-Drill-Inox are unequally split. In addition, the drill has three guide chamfers. This prevents vibrations and reduces friction. The highly polished flutes guarantee optimum chip flow. The cutting geometry, which is specially adapted to stainless steel, makes it possible to drill holes with up to 30 % higher feed rates compared to conventional drills.
Selected facets:
- 12xD Drilling depth xD
- MICRO-Drill-Steel Product Family
- MEGA-Speed-Drill-Inox family
- MEGA-Speed-Drill-Inox Product Family
- 58.0 Drilling depth (l3)
-
Product Family
-
Diameter (d1)
-
-
Shank diameter (d2)
-
Drilling depth xD
-
Number of cutting edges (z)
-
Cooling
-
Tip angle
-
Product category
-
Bore tolerance
(5)
(5)
(5)-
MEGA-Speed-Drill-Inox
d1: 4,2 mm; d2: 6 mm; l1: 102 mm; l2: 64 mm; l3: 58 mm; z: 2 ; internal cooling; SCD411-0420-2-3-135HA12-HP374
Order number: 31132700
In Stock -
MEGA-Speed-Drill-Inox
d1: 4,3 mm; d2: 6 mm; l1: 102 mm; l2: 64 mm; l3: 58 mm; z: 2 ; internal cooling; SCD411-0430-2-3-135HA12-HP374
Order number: 31132701
In Stock -
MEGA-Speed-Drill-Inox
d1: 4,5 mm; d2: 6 mm; l1: 102 mm; l2: 64 mm; l3: 58 mm; z: 2 ; internal cooling; SCD411-0450-2-3-135HA12-HP374
Order number: 31132703
In Stock -
MEGA-Speed-Drill-Inox
d1: 4 mm; d2: 6 mm; l1: 102 mm; l2: 64 mm; l3: 58 mm; z: 2 ; internal cooling; SCD411-0400-2-3-135HA12-HP374
Order number: 31132698
currently out of stockInform me when article is back in stock -
MEGA-Speed-Drill-Inox
d1: 4,1 mm; d2: 6 mm; l1: 102 mm; l2: 64 mm; l3: 58 mm; z: 2 ; internal cooling; SCD411-0410-2-3-135HA12-HP374
Order number: 31132699
currently out of stockInform me when article is back in stock
