MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 20xD Drilling depth xD
- 5xD Drilling depth xD
- 6.0 Shank diameter (d2)
- 40xD Drilling depth xD
- MEGA-180°-Drill family
- 8.0 Shank diameter (d2)
-
Diameter (d1)
-
-
Drilling depth (l3)
-
-
Total length (l1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(50)
(50)
(50)-
MEGA-180°-Drill
d1: 7,5 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD231-0750-2-4-180HA05-HP230
Order number: 30382811
In Stock -
MEGA-180°-Drill
d1: 7,6 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD231-0760-2-4-180HA05-HP230
Order number: 30382812
In Stock -
MEGA-180°-Drill
d1: 7,8 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD231-0780-2-4-180HA05-HP230
Order number: 30382814
In Stock -
MEGA-180°-Drill
d1: 7,9 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD231-0790-2-4-180HA05-HP230
Order number: 30382815
In Stock -
MEGA-180°-Drill
d1: 8 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD231-0800-2-4-180HA05-HP230
Order number: 30382816
In Stock
