MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 15xD Bohrtiefe xD
- 3xD Bohrtiefe xD
- 5xD Bohrtiefe xD
- 8.0 Schaftdurchmesser (d2)
- 14.0 Schaftdurchmesser (d2)
- MEGA-180°-Drill Familie
-
Durchmesser (d1)
-
-
Bohrtiefe (l3)
-
-
Gesamtlänge (l1)
-
-
Schneidenanzahl (z)
-
Kühlmittelzufuhr
-
Produktfamilie
-
Produktklasse
-
Bohrungstoleranz
(52)
(52)
(52)-
MEGA-180°-Drill
d1: 13 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD231-1300-2-4-180HA05-HP230
Order number: 30382861
In Stock -
MEGA-180°-Drill
d1: 13,5 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD231-1350-2-4-180HA05-HP230
Order number: 30382862
In Stock -
MEGA-180°-Drill
d1: 13,5 mm; d2: 14 mm; l1: 105 mm; l2: 58 mm; l3: 41 mm; z: 2; internal cooling; SCD231-1350-2-4-180HA03-HP230
Order number: 30382743
In Stock -
MEGA-180°-Drill
d1: 13,8 mm; d2: 14 mm; l1: 105 mm; l2: 58 mm; l3: 41 mm; z: 2; internal cooling; SCD231-1380-2-4-180HA03-HP230
Order number: 30382744
In Stock -
MEGA-180°-Drill
d1: 13,8 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD231-1380-2-4-180HA05-HP230
Order number: 30382863
In Stock -
MEGA-180°-Drill
d1: 14 mm; d2: 14 mm; l1: 105 mm; l2: 58 mm; l3: 41 mm; z: 2; internal cooling; SCD231-1400-2-4-180HA03-HP230
Order number: 30382745
In Stock -
MEGA-180°-Drill
d1: 14 mm; d2: 14 mm; l1: 122 mm; l2: 75 mm; l3: 58 mm; z: 2; internal cooling; SCD231-1400-2-4-180HA05-HP230
Order number: 30382864
In Stock
