MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 12.0 Shank diameter (d2)
- 30xD Drilling depth xD
- 5xD Drilling depth xD
- 10.0 Shank diameter (d2)
- MEGA-180°-Drill family
-
Product Family
-
Diameter (d1)
-
-
Total length (l1)
-
Number of cutting edges (z)
-
Cooling
-
Tip angle
-
Product category
-
Bore tolerance
(35)
(35)
(35)-
MEGA-180°-Drill
d1: 11,7 mm; d2: 12 mm; l1: 116 mm; l2: 69 mm; l3: 54 mm; z: 2; internal cooling; SCD231-1170-2-4-180HA05-HP230
Order number: 30382855
In Stock -
MEGA-180°-Drill
d1: 11,8 mm; d2: 12 mm; l1: 116 mm; l2: 69 mm; l3: 54 mm; z: 2; internal cooling; SCD231-1180-2-4-180HA05-HP230
Order number: 30382856
In Stock -
MEGA-180°-Drill
d1: 12 mm; d2: 12 mm; l1: 116 mm; l2: 69 mm; l3: 54 mm; z: 2; internal cooling; SCD231-1200-2-4-180HA05-HP230
Order number: 30382858
In Stock -
MEGA-180°-Drill
d1: 9,1 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; internal cooling; SCD231-0910-2-4-180HA05-HP230
Order number: 30382827
currently out of stockInform me when article is back in stock -
MEGA-180°-Drill
d1: 11,2 mm; d2: 12 mm; l1: 116 mm; l2: 69 mm; l3: 54 mm; z: 2; internal cooling; SCD231-1120-2-4-180HA05-HP230
Order number: 30382850
currently out of stockInform me when article is back in stock
