Tritan-Drill-Alu
MAPAL has developed the Tritan Drill Alu especially for the high-feed machining of aluminium. The three-edged solid carbide drill has a coordinated, finely ground groove profile. Large chip spaces and a special, sharp cutting edge preparation ensure optimum chip formation, reduce heat build-up and ensure the reliable removal of the chips. The special drill tip of the Tritan-Drill-Alu enables drilling on uneven and critical surfaces as well as safe centering.
Selected facets:
- 5xD Drilling depth xD
- 10.0 Shank diameter (d2)
- 7.0 Shank diameter (d2)
- Tritan-Drill-Alu family
- 8.0 Shank diameter (d2)
-
Material charateristics
-
Diameter (d1)
-
-
Drilling depth xD
-
Drilling depth (l3)
-
-
Total length (l1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(22)-
Tritan-Drill-Alu
d1: 8,4 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 3, internal cooling, SCD681-0840-3-3-130HA05-HU318
Order number: 31307643
In Stock -
Tritan-Drill-Alu
d1: 8,5 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 3, internal cooling, SCD681-0850-3-3-130HA05-HU318
Order number: 31307644
In Stock -
Tritan-Drill-Alu
d1: 8,8 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 3, internal cooling, SCD681-0880-3-3-130HA05-HU318
Order number: 31307645
In Stock -
Tritan-Drill-Alu
d1: 9 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 3, internal cooling, SCD681-0900-3-3-130HA05-HU318
Order number: 31307646
In Stock -
Tritan-Drill-Alu
d1: 9,1 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 3, internal cooling, SCD681-0910-3-3-130HA05-HU318
Order number: 31307647
In Stock -
Tritan-Drill-Alu
d1: 9,8 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 3, internal cooling, SCD681-0980-3-3-130HA05-HU318
Order number: 31307648
In Stock -
Tritan-Drill-Alu
d1: 10 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 3, internal cooling, SCD681-1000-3-3-130HA05-HU318
Order number: 31307649
In Stock
