MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
Remove all filters-
Diameter (d1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(20)
(20)
(20)-
MEGA-180°-Drill
d1: 9,6 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; internal cooling; SCD231-0960-2-4-180HA03-HP230
Order number: 30382715
In Stock -
MEGA-180°-Drill
d1: 9,7 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; internal cooling; SCD231-0970-2-4-180HA03-HP230
Order number: 30382716
In Stock -
MEGA-180°-Drill
d1: 9,8 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; internal cooling; SCD231-0980-2-4-180HA03-HP230
Order number: 30382717
In Stock -
MEGA-180°-Drill
d1: 9,9 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; internal cooling; SCD231-0990-2-4-180HA03-HP230
Order number: 30382718
In Stock -
MEGA-180°-Drill
d1: 10 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; internal cooling; SCD231-1000-2-4-180HA03-HP230
Order number: 30382719
In Stock
