MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 12xD Bohrtiefe xD
- 20xD Bohrtiefe xD
- 3xD Bohrtiefe xD
- 10.0 Schaftdurchmesser (d2)
- MEGA-180°-Drill family
- MEGA-180°-Drill Produktfamilie
-
Diameter (d1)
-
-
Schneidenanzahl (z)
-
Kühlmittelzufuhr
-
Produktfamilie
-
Produktklasse
-
Bohrungstoleranz
(20)
(20)
(20)-
MEGA-180°-Drill
d1: 9,6 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; internal cooling; SCD231-0960-2-4-180HA03-HP230
Order number: 30382715
In Stock -
MEGA-180°-Drill
d1: 9,7 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; internal cooling; SCD231-0970-2-4-180HA03-HP230
Order number: 30382716
In Stock -
MEGA-180°-Drill
d1: 9,8 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; internal cooling; SCD231-0980-2-4-180HA03-HP230
Order number: 30382717
In Stock -
MEGA-180°-Drill
d1: 9,9 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; internal cooling; SCD231-0990-2-4-180HA03-HP230
Order number: 30382718
In Stock -
MEGA-180°-Drill
d1: 10 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; internal cooling; SCD231-1000-2-4-180HA03-HP230
Order number: 30382719
In Stock
