MEGA-180°-Drill-Alu
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
Remove all filters-
Material charateristics
-
Diameter (d1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(4)-
MEGA-180°-Drill-Alu
d1: 6,5 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD241-0650-2-4-180HA05-HU630
Order number: 30383037
In Stock -
MEGA-180°-Drill-Alu
d1: 7 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD241-0700-2-4-180HA05-HU630
Order number: 30383042
In Stock -
MEGA-180°-Drill-Alu
d1: 7,5 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD241-0750-2-4-180HA05-HU630
Order number: 30383047
In Stock -
MEGA-180°-Drill-Alu
d1: 8 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD241-0800-2-4-180HA05-HU630
Order number: 30383052
In Stock
