MEGA-180°-Drill-Alu
Diameter d1 (mm)
4.0
Your unit price
*Login requiredWe recommend:
Product description
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Technical specifications
- Product class
- Expert-Line
- Drilling depth
- 3xD
- d1
- 4 mm
- d2
- 6 mm
- l1
- 66 mm
- l2
- 24 mm
- l3
- 17 mm
- l4
- 36 mm
- Cooling
- internal cooling
- Number of cutting edges (z)
- 2
- Shank tolerance
- h6
- Bore tolerance
- ≥ IT 9
- Shank type
- HA
- Tip angle
- 180 °
- Side rake angle
- 30 °
- Material group
- R8
Downloads
- Technical drawing in dxf
- 30382893_606614326-000-00-ED1.DXF
- Technical drawing in tif
- 30382893_606614326-000-00-ED1.TIF
- Cutting data recommendations
- 30382893_MEGA-180°-Drill-Alu_EN.pdf