Tritan-Drill-Alu
MAPAL has developed the Tritan Drill Alu especially for the high-feed machining of aluminium. The three-edged solid carbide drill has a coordinated, finely ground groove profile. Large chip spaces and a special, sharp cutting edge preparation ensure optimum chip formation, reduce heat build-up and ensure the reliable removal of the chips. The special drill tip of the Tritan-Drill-Alu enables drilling on uneven and critical surfaces as well as safe centering.
Selected facets:
- Tritan-Drill-Alu Product Family
- Tritan-Drill-Alu family
- 6.0 Shank diameter (d2)
- 29.0 Drilling depth (l3)
-
Product Family
-
Material charateristics
-
Diameter (d1)
-
-
Shank diameter (d2)
-
Drilling depth xD
-
Number of cutting edges (z)
-
Cooling
-
Tip angle
-
Product category
-
Bore tolerance
(7)-
Tritan-Drill-Alu
d1: 4 mm; d2: 6 mm; l1: 74 mm; l2: 36 mm; l3: 29 mm; z: 3, internal cooling, SCD681-0400-3-3-130HA05-HU318
Order number: 31307609
In Stock -
Tritan-Drill-Alu
d1: 4,1 mm; d2: 6 mm; l1: 74 mm; l2: 36 mm; l3: 29 mm; z: 3, internal cooling, SCD681-0410-3-3-130HA05-HU318
Order number: 31307610
In Stock -
Tritan-Drill-Alu
d1: 4,2 mm; d2: 6 mm; l1: 74 mm; l2: 36 mm; l3: 29 mm; z: 3, internal cooling, SCD681-0420-3-3-130HA05-HU318
Order number: 31307611
In Stock -
Tritan-Drill-Alu
d1: 4,3 mm; d2: 6 mm; l1: 74 mm; l2: 36 mm; l3: 29 mm; z: 3, internal cooling, SCD681-0430-3-3-130HA05-HU318
Order number: 31307612
In Stock -
Tritan-Drill-Alu
d1: 4,5 mm; d2: 6 mm; l1: 74 mm; l2: 36 mm; l3: 29 mm; z: 3, internal cooling, SCD681-0450-3-3-130HA05-HU318
Order number: 31307613
In Stock -
Tritan-Drill-Alu
d1: 4,6 mm; d2: 6 mm; l1: 74 mm; l2: 36 mm; l3: 29 mm; z: 3, internal cooling, SCD681-0460-3-3-130HA05-HU318
Order number: 31307614
In Stock -
Tritan-Drill-Alu
d1: 4,65 mm; d2: 6 mm; l1: 74 mm; l2: 36 mm; l3: 29 mm; z: 3, internal cooling, SCD681-0465-3-3-130HA05-HU318
Order number: 31307615
In Stock
