MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
-
Diameter (d1)
-
-
Drilling depth (l3)
-
-
Total length (l1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(10)
(10)
(10)-
MEGA-180°-Drill
d1: 16,5 mm; d2: 18 mm; l1: 121 mm; l2: 71 mm; l3: 49 mm; z: 2; internal cooling; SCD231-1650-2-4-180HA03-HP230
Order number: 30382752
In Stock -
MEGA-180°-Drill
d1: 16,5 mm; d2: 18 mm; l1: 141 mm; l2: 91 mm; l3: 69 mm; z: 2; internal cooling; SCD231-1650-2-4-180HA05-HP230
Order number: 30382871
In Stock -
MEGA-180°-Drill
d1: 16,8 mm; d2: 18 mm; l1: 121 mm; l2: 71 mm; l3: 49 mm; z: 2; internal cooling; SCD231-1680-2-4-180HA03-HP230
Order number: 30382753
In Stock -
MEGA-180°-Drill
d1: 17 mm; d2: 18 mm; l1: 141 mm; l2: 91 mm; l3: 69 mm; z: 2; internal cooling; SCD231-1700-2-4-180HA05-HP230
Order number: 30382873
In Stock -
MEGA-180°-Drill
d1: 17 mm; d2: 18 mm; l1: 121 mm; l2: 71 mm; l3: 49 mm; z: 2; internal cooling; SCD231-1700-2-4-180HA03-HP230
Order number: 30382754
In Stock -
MEGA-180°-Drill
d1: 17,5 mm; d2: 18 mm; l1: 121 mm; l2: 71 mm; l3: 49 mm; z: 2; internal cooling; SCD231-1750-2-4-180HA03-HP230
Order number: 30382755
In Stock -
MEGA-180°-Drill
d1: 17,5 mm; d2: 18 mm; l1: 141 mm; l2: 91 mm; l3: 69 mm; z: 2; internal cooling; SCD231-1750-2-4-180HA05-HP230
Order number: 30382874
In Stock -
MEGA-180°-Drill
d1: 17,8 mm; d2: 18 mm; l1: 141 mm; l2: 91 mm; l3: 69 mm; z: 2; internal cooling; SCD231-1780-2-4-180HA05-HP230
Order number: 30382875
In Stock -
MEGA-180°-Drill
d1: 18 mm; d2: 18 mm; l1: 141 mm; l2: 91 mm; l3: 69 mm; z: 2; internal cooling; SCD231-1800-2-4-180HA05-HP230
Order number: 30382876
In Stock -
MEGA-180°-Drill
d1: 18 mm; d2: 18 mm; l1: 121 mm; l2: 71 mm; l3: 49 mm; z: 2; internal cooling; SCD231-1800-2-4-180HA03-HP230
Order number: 30382757
In Stock
