MEGA-180°-Drill-Alu
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 12.0 Shank diameter (d2)
- 30xD Drilling depth xD
- 3xD Drilling depth xD
- 15xD Drilling depth xD
- MEGA-180°-Drill-Alu family
- internal cooling Cooling
-
Material charateristics
-
Diameter (d1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(2)-
MEGA-180°-Drill-Alu
d1: 11 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2 ; internal cooling; SCD241-1100-2-4-180HA03-HU630
Order number: 30382965
In Stock -
MEGA-180°-Drill-Alu
d1: 12 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2 ; internal cooling; SCD241-1200-2-4-180HA03-HU630
Order number: 30382975
In Stock
