MEGA-180°-Drill-Alu
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 15xD Drilling depth xD
- 5xD Drilling depth xD
- 10.0 Shank diameter (d2)
- 7.0 Shank diameter (d2)
- MEGA-180°-Drill-Alu family
- 8.0 Shank diameter (d2)
-
Material charateristics
-
Diameter (d1)
-
-
Drilling depth (l3)
-
-
Total length (l1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(8)-
MEGA-180°-Drill-Alu
d1: 6,5 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD241-0650-2-4-180HA05-HU630
Order number: 30383037
In Stock -
MEGA-180°-Drill-Alu
d1: 7 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD241-0700-2-4-180HA05-HU630
Order number: 30383042
In Stock -
MEGA-180°-Drill-Alu
d1: 7,5 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD241-0750-2-4-180HA05-HU630
Order number: 30383047
In Stock -
MEGA-180°-Drill-Alu
d1: 8 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD241-0800-2-4-180HA05-HU630
Order number: 30383052
In Stock -
MEGA-180°-Drill-Alu
d1: 8,2 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; internal cooling; SCD241-0820-2-4-180HA05-HU630
Order number: 30383054
In Stock -
MEGA-180°-Drill-Alu
d1: 8,5 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; internal cooling; SCD241-0850-2-4-180HA05-HU630
Order number: 30383057
In Stock -
MEGA-180°-Drill-Alu
d1: 9 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; internal cooling; SCD241-0900-2-4-180HA05-HU630
Order number: 30383062
In Stock -
MEGA-180°-Drill-Alu
d1: 9,3 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; internal cooling; SCD241-0930-2-4-180HA05-HU630
Order number: 30383066
In Stock
