MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 6.0 Shank diameter (d2)
- 5.0 Shank diameter (d2)
- 3.0 Shank diameter (d2)
-
Material charateristics
- MEGA-180°-Drill family
-
Diameter (d1)
-
-
Drilling depth (l3)
-
-
Total length (l1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(64)
(64)-
MEGA-180°-Drill
d1: 6 mm; d2: 6 mm; l1: 82 mm; l2: 44 mm; l3: 35 mm; z: 2; internal cooling; SCD231-0600-2-4-180HA05-HP230
Order number: 30382796
In Stock -
MEGA-180°-Drill
d1: 4,1 mm; d2: 6 mm; l1: 66 mm; l2: 24 mm; l3: 17 mm; z: 2; internal cooling; SCD231-0410-2-4-180HA03-HP230
Order number: 30382658
currently out of stockInform me when article is back in stock -
MEGA-180°-Drill
d1: 5,1 mm; d2: 6 mm; l1: 82 mm; l2: 44 mm; l3: 35 mm; z: 2; internal cooling; SCD231-0510-2-4-180HA05-HP230
Order number: 30382786
currently out of stockInform me when article is back in stock -
MEGA-180°-Drill
d1: 5,2 mm; d2: 6 mm; l1: 66 mm; l2: 28 mm; l3: 20 mm; z: 2; internal cooling; SCD231-0520-2-4-180HA03-HP230
Order number: 30382670
currently out of stockInform me when article is back in stock
