MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 3.0 Shank diameter (d2)
- 8.0 Shank diameter (d2)
- MEGA-180°-Drill family
- 3xD Drilling depth xD
- 18.0 Shank diameter (d2)
- 5xD Drilling depth xD
-
Diameter (d1)
-
-
Drilling depth (l3)
-
-
Total length (l1)
-
-
Number of cutting edges (z)
-
Cooling
-
Product Family
-
Product category
-
Bore tolerance
(49)
(49)
(49)-
MEGA-180°-Drill
d1: 18 mm; d2: 18 mm; l1: 121 mm; l2: 71 mm; l3: 49 mm; z: 2; internal cooling; SCD231-1800-2-4-180HA03-HP230
Order number: 30382757
In Stock -
MEGA-180°-Drill
d1: 18 mm; d2: 18 mm; l1: 141 mm; l2: 91 mm; l3: 69 mm; z: 2; internal cooling; SCD231-1800-2-4-180HA05-HP230
Order number: 30382876
In Stock -
MEGA-180°-Drill
d1: 6,3 mm; d2: 8 mm; l1: 91 mm; l2: 53 mm; l3: 43 mm; z: 2; internal cooling; SCD231-0630-2-4-180HA05-HP230
Order number: 30382799
currently out of stockInform me when article is back in stock -
MEGA-180°-Drill
d1: 6,9 mm; d2: 8 mm; l1: 79 mm; l2: 34 mm; l3: 24 mm; z: 2; internal cooling; SCD231-0690-2-4-180HA03-HP230
Order number: 30382688
currently out of stockInform me when article is back in stock
