MEGA-180°-Drill-Alu

  • Product image MEGA-180°-Drill-Alu
  • Product image MEGA-180°-Drill-Alu
  • Technical drawing MEGA-180°-Drill-Alu
  • Technical drawing MEGA-180°-Drill-Alu

Diameter d1 (mm)

6.0

Your unit price

*Login required

Article

30383032

Quantity

Added to Your Shopping Cart

Unsere Produktempfehlung:

Product description

The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.

Material suitability

Technical specifications

Schneidstoff
HU630  
Produktklasse
Expert-Line  
Bohrtiefe
5xD  
d1
6   mm
d2
6   mm
l1
82   mm
l2
44   mm
l3
35   mm
l4
36   mm
Kühlmittelaustritt
innere Kühlmittelzufuhr  
Anzahl Schneiden (z)
2  
Schafttoleranz
h6  
Bohrungstoleranz
≥ IT 9  
Schaftform
HA  
Spitzenwinkel
180   °
Seitenspanwinkel
30   °
Materialgruppe
R8

Downloads

Technische Zeichnung in tif
30383032_606005656-000-00-ED1.TIF
Technische Zeichnung in dxf
30383032_606005656-000-00-ED1.DXF
3D Hüllkontur in stp
30383032_607488441-000-00-E43.STP
Technical drawing in tif
30383032_606005656-000-00-ED1.tif
Cutting data recommendations
30383032_MEGA-180°-Drill-Alu_EN.pdf