MEGA-180°-Drill-Alu
Diameter d1 (mm)
6.5
Your unit price
*Login requiredProduct description
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Technical specifications
- Cutting material
- HU630
- Produktklasse
- Expert-Line
- Bohrtiefe
- 5xD
- d1
- 6.5 mm
- d2
- 8 mm
- l1
- 91 mm
- l2
- 53 mm
- l3
- 43 mm
- l4
- 36 mm
- Kühlmittelaustritt
- innere Kühlmittelzufuhr
- Anzahl Schneiden (z)
- 2
- Schafttoleranz
- h6
- Bohrungstoleranz
- ≥ IT 9
- Schaftform
- HA
- Spitzenwinkel
- 180 °
- Seitenspanwinkel
- 30 °
- Materialgruppe
- R8
- Spezifikation
- SCD241-0650-2-4-180HA05-HU630
Downloads
- 3D Hüllkontur in stp
- 30383037_607485194-000-00-E43.STP
- Technische Zeichnung in dxf
- 30383037_607797154-000-00-ED1.DXF
- Technische Zeichnung in pdf
- 30383037_607797154-000-00-ED1.PDF
- Technische Zeichnung in tif
- 30383037_607797154-000-00-ED1.TIF
- Cutting data recommendations
- 30383037_MEGA-180°-Drill-Alu_EN.pdf