MEGA-180°-Drill-Alu
Durchmesser d1 (mm)
6.0
Ihr Stückpreis
*Login erforderlichUnsere Produktempfehlung:
Produktbeschreibung
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Technische Daten
- Schneidstoff
- HU630
- Produktklasse
- Expert-Line
- Bohrtiefe
- 3xD
- d1
- 6 mm
- d2
- 6 mm
- l1
- 66 mm
- l2
- 28 mm
- l3
- 20 mm
- l4
- 36 mm
- Kühlmittelaustritt
- innere Kühlmittelzufuhr
- Anzahl Schneiden (z)
- 2
- Schafttoleranz
- h6
- Bohrungstoleranz
- ≥ IT 9
- Schaftform
- HA
- Spitzenwinkel
- 180 °
- Seitenspanwinkel
- 30 °
- Materialgruppe
- R8
Downloads
- Technische Zeichnung in tif
- 30382915_606244390-000-00-ED1.TIF
- Technische Zeichnung in dxf
- 30382915_606244390-000-00-ED1.DXF
- 3D Hüllkontur in stp
- 30382915_608070567-000-00-E43.STP
- Technical drawing in tif
- 30382915_606244390-000-00-ED1.tif
- Cutting data recommendations
- 30382915_MEGA-180°-Drill-Alu_EN.pdf