MEGA-180°-Drill-Alu
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 7.0 Schaftdurchmesser (d2)
- 8.0 Schaftdurchmesser (d2)
- 18.0 Schaftdurchmesser (d2)
- 3xD Bohrtiefe xD
- MEGA-180°-Drill-Alu Familie
-
Materialeignung
-
Durchmesser (d1)
-
-
Bohrtiefe (l3)
-
-
Gesamtlänge (l1)
-
-
Schneidenanzahl (z)
-
Kühlmittelzufuhr
-
Produktfamilie
-
Produktklasse
-
Bohrungstoleranz
(9)-
MEGA-180°-Drill-Alu
d1: 6,5 mm; d2: 8 mm; l1: 79 mm; l2: 34 mm; l3: 24 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-0650-2-4-180HA03-HU630
Order number: 30382920
In Stock -
MEGA-180°-Drill-Alu
d1: 6,7 mm; d2: 8 mm; l1: 79 mm; l2: 34 mm; l3: 24 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-0670-2-4-180HA03-HU630
Order number: 30382922
In Stock -
MEGA-180°-Drill-Alu
d1: 7 mm; d2: 8 mm; l1: 79 mm; l2: 34 mm; l3: 24 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-0700-2-4-180HA03-HU630
Order number: 30382925
In Stock -
MEGA-180°-Drill-Alu
d1: 7,2 mm; d2: 8 mm; l1: 79 mm; l2: 41 mm; l3: 29 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-0720-2-4-180HA03-HU630
Order number: 30382927
In Stock -
MEGA-180°-Drill-Alu
d1: 7,4 mm; d2: 8 mm; l1: 79 mm; l2: 41 mm; l3: 29 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-0740-2-4-180HA03-HU630
Order number: 30382929
In Stock -
MEGA-180°-Drill-Alu
d1: 7,5 mm; d2: 8 mm; l1: 79 mm; l2: 41 mm; l3: 29 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-0750-2-4-180HA03-HU630
Order number: 30382930
In Stock -
MEGA-180°-Drill-Alu
d1: 7,8 mm; d2: 8 mm; l1: 79 mm; l2: 41 mm; l3: 29 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-0780-2-4-180HA03-HU630
Order number: 30382933
In Stock -
MEGA-180°-Drill-Alu
d1: 8 mm; d2: 8 mm; l1: 79 mm; l2: 41 mm; l3: 29 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-0800-2-4-180HA03-HU630
Order number: 30382935
In Stock -
MEGA-180°-Drill-Alu
d1: 17 mm; d2: 18 mm; l1: 121 mm; l2: 71 mm; l3: 49 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-1700-2-4-180HA03-HU630
Order number: 30382990
In Stock
