MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 10.0 Schaftdurchmesser (d2)
- 20.0 Schaftdurchmesser (d2)
- 12.0 Schaftdurchmesser (d2)
- 16.0 Schaftdurchmesser (d2)
- MEGA-180°-Drill Familie
-
Durchmesser (d1)
-
-
Bohrtiefe (l3)
-
-
Gesamtlänge (l1)
-
-
Schneidenanzahl (z)
-
Kühlmittelzufuhr
-
Produktfamilie
-
Produktklasse
-
Bohrungstoleranz
(93)
(93)
(93)-
MEGA-180°-Drill
d1: 8,1 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0810-2-4-180HA05-HP230
Order number: 30382817
In Stock -
MEGA-180°-Drill
d1: 8,1 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0810-2-4-180HA03-HP230
Order number: 30382700
In Stock -
MEGA-180°-Drill
d1: 8,2 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0820-2-4-180HA05-HP230
Order number: 30382818
In Stock -
MEGA-180°-Drill
d1: 8,2 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0820-2-4-180HA03-HP230
Order number: 30382701
In Stock -
MEGA-180°-Drill
d1: 8,3 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0830-2-4-180HA03-HP230
Order number: 30382702
In Stock -
MEGA-180°-Drill
d1: 8,3 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0830-2-4-180HA05-HP230
Order number: 30382819
In Stock -
MEGA-180°-Drill
d1: 8,4 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0840-2-4-180HA03-HP230
Order number: 30382703
In Stock -
MEGA-180°-Drill
d1: 8,4 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0840-2-4-180HA05-HP230
Order number: 30382820
In Stock -
MEGA-180°-Drill
d1: 8,5 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0850-2-4-180HA03-HP230
Order number: 30382704
In Stock -
MEGA-180°-Drill
d1: 8,5 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0850-2-4-180HA05-HP230
Order number: 30382821
In Stock -
MEGA-180°-Drill
d1: 8,6 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0860-2-4-180HA03-HP230
Order number: 30382705
In Stock -
MEGA-180°-Drill
d1: 8,6 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0860-2-4-180HA05-HP230
Order number: 30382822
In Stock -
MEGA-180°-Drill
d1: 8,7 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0870-2-4-180HA05-HP230
Order number: 30382823
In Stock -
MEGA-180°-Drill
d1: 8,7 mm; d2: 10 mm; l1: 89 mm; l2: 47 mm; l3: 35 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0870-2-4-180HA03-HP230
Order number: 30382706
In Stock -
MEGA-180°-Drill
d1: 8,8 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0880-2-4-180HA05-HP230
Order number: 30382824
In Stock
