MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- internal cooling Kühlmittelzufuhr
- 3xD Bohrtiefe xD
- 4xD Bohrtiefe xD
- 12.0 Schaftdurchmesser (d2)
- 20.0 Schaftdurchmesser (d2)
- MEGA-180°-Drill Familie
-
Produktfamilie
-
Diameter (d1)
-
-
Gesamtlänge (l1)
-
Schneidenanzahl (z)
-
Kühlmittelzufuhr
-
Spitzenwinkel
-
Produktklasse
-
Bohrungstoleranz
(24)
(24)
(24)-
MEGA-180°-Drill
d1: 10,1 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1010-2-4-180HA03-HP230
Order number: 30382720
In Stock -
MEGA-180°-Drill
d1: 10,2 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1020-2-4-180HA03-HP230
Order number: 30382721
In Stock -
MEGA-180°-Drill
d1: 10,3 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1030-2-4-180HA03-HP230
Order number: 30382722
In Stock -
MEGA-180°-Drill
d1: 10,4 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1040-2-4-180HA03-HP230
Order number: 30382723
In Stock -
MEGA-180°-Drill
d1: 10,5 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1050-2-4-180HA03-HP230
Order number: 30382724
In Stock -
MEGA-180°-Drill
d1: 10,6 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1060-2-4-180HA03-HP230
Order number: 30382725
In Stock -
MEGA-180°-Drill
d1: 10,7 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1070-2-4-180HA03-HP230
Order number: 30382726
In Stock -
MEGA-180°-Drill
d1: 10,8 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1080-2-4-180HA03-HP230
Order number: 30382727
In Stock -
MEGA-180°-Drill
d1: 11 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1100-2-4-180HA03-HP230
Order number: 30382729
In Stock -
MEGA-180°-Drill
d1: 11,1 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1110-2-4-180HA03-HP230
Order number: 30382730
In Stock -
MEGA-180°-Drill
d1: 11,2 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1120-2-4-180HA03-HP230
Order number: 30382731
In Stock -
MEGA-180°-Drill
d1: 11,3 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1130-2-4-180HA03-HP230
Order number: 30382732
In Stock -
MEGA-180°-Drill
d1: 11,4 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1140-2-4-180HA03-HP230
Order number: 30382733
In Stock -
MEGA-180°-Drill
d1: 11,5 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1150-2-4-180HA03-HP230
Order number: 30382734
In Stock -
MEGA-180°-Drill
d1: 11,6 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1160-2-4-180HA03-HP230
Order number: 30382735
In Stock
