MEGA-180°-Drill-Alu
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 5xD Bohrtiefe xD
- 7.0 Schaftdurchmesser (d2)
- 6.0 Schaftdurchmesser (d2)
- 25.0 Schaftdurchmesser (d2)
- 18.0 Schaftdurchmesser (d2)
- MEGA-180°-Drill-Alu Familie
-
Materialeignung
-
Durchmesser (d1)
-
-
Bohrtiefe (l3)
-
-
Gesamtlänge (l1)
-
-
Schneidenanzahl (z)
-
Kühlmittelzufuhr
-
Produktfamilie
-
Produktklasse
-
Bohrungstoleranz
(9)-
MEGA-180°-Drill-Alu
d1: 3 mm; d2: 6 mm; l1: 66 mm; l2: 28 mm; l3: 23 mm; z: 2; innere Kühlmittelzufuhr; SCD241-0300-2-4-180HA05-HU630
Order number: 30383000
In Stock -
MEGA-180°-Drill-Alu
d1: 3,5 mm; d2: 6 mm; l1: 66 mm; l2: 28 mm; l3: 23 mm; z: 2; innere Kühlmittelzufuhr; SCD241-0350-2-4-180HA05-HU630
Order number: 30383005
In Stock -
MEGA-180°-Drill-Alu
d1: 4 mm; d2: 6 mm; l1: 74 mm; l2: 36 mm; l3: 29 mm; z: 2; innere Kühlmittelzufuhr; SCD241-0400-2-4-180HA05-HU630
Order number: 30383010
In Stock -
MEGA-180°-Drill-Alu
d1: 4,1 mm; d2: 6 mm; l1: 74 mm; l2: 36 mm; l3: 29 mm; z: 2; innere Kühlmittelzufuhr; SCD241-0410-2-4-180HA05-HU630
Order number: 30383011
In Stock -
MEGA-180°-Drill-Alu
d1: 4,8 mm; d2: 6 mm; l1: 82 mm; l2: 44 mm; l3: 35 mm; z: 2; innere Kühlmittelzufuhr; SCD241-0480-2-4-180HA05-HU630
Order number: 30383019
In Stock -
MEGA-180°-Drill-Alu
d1: 5 mm; d2: 6 mm; l1: 82 mm; l2: 44 mm; l3: 35 mm; z: 2; innere Kühlmittelzufuhr; SCD241-0500-2-4-180HA05-HU630
Order number: 30383021
In Stock -
MEGA-180°-Drill-Alu
d1: 5,6 mm; d2: 6 mm; l1: 82 mm; l2: 44 mm; l3: 35 mm; z: 2; innere Kühlmittelzufuhr; SCD241-0560-2-4-180HA05-HU630
Order number: 30383028
In Stock -
MEGA-180°-Drill-Alu
d1: 6 mm; d2: 6 mm; l1: 82 mm; l2: 44 mm; l3: 35 mm; z: 2; innere Kühlmittelzufuhr; SCD241-0600-2-4-180HA05-HU630
Order number: 30383032
In Stock -
MEGA-180°-Drill-Alu
d1: 15,7 mm; d2: 6 mm; l1: 131 mm; l2: 81 mm; l3: 61 mm; z: 2; innere Kühlmittelzufuhr; SCD241-1570-2-4-180HA05-HU630
Order number: 31237410
In Stock
