MEGA-180°-Drill-Alu
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 3xD Bohrtiefe xD
- 25.0 Schaftdurchmesser (d2)
- 12.0 Schaftdurchmesser (d2)
- MEGA-180°-Drill-Alu Familie
- 14.0 Schaftdurchmesser (d2)
-
Produktfamilie
-
Materialeignung
-
Diameter (d1)
-
-
Schneidenanzahl (z)
-
Kühlmittelzufuhr
-
Spitzenwinkel
-
Produktklasse
-
Bohrungstoleranz
(3)-
MEGA-180°-Drill-Alu
d1: 11 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-1100-2-4-180HA03-HU630
Order number: 30382965
In Stock -
MEGA-180°-Drill-Alu
d1: 12 mm; d2: 12 mm; l1: 100 mm; l2: 53 mm; l3: 38 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-1200-2-4-180HA03-HU630
Order number: 30382975
In Stock -
MEGA-180°-Drill-Alu
d1: 13 mm; d2: 14 mm; l1: 105 mm; l2: 58 mm; l3: 41 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-1300-2-4-180HA03-HU630
Order number: 30382978
In Stock
