MEGA-180°-Drill-Alu
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 3xD Bohrtiefe xD
- 14.0 Schaftdurchmesser (d2)
- 16.0 Schaftdurchmesser (d2)
- 30xD Bohrtiefe xD
- 18.0 Schaftdurchmesser (d2)
- MEGA-180°-Drill-Alu Familie
-
Materialeignung
-
Durchmesser (d1)
-
-
Bohrtiefe (l3)
-
-
Gesamtlänge (l1)
-
-
Schneidenanzahl (z)
-
Kühlmittelzufuhr
-
Produktfamilie
-
Produktklasse
-
Bohrungstoleranz
(3)-
MEGA-180°-Drill-Alu
d1: 13 mm; d2: 14 mm; l1: 105 mm; l2: 58 mm; l3: 41 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-1300-2-4-180HA03-HU630
Order number: 30382978
In Stock -
MEGA-180°-Drill-Alu
d1: 14,5 mm; d2: 16 mm; l1: 113 mm; l2: 63 mm; l3: 43 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-1450-2-4-180HA03-HU630
Order number: 30382982
In Stock -
MEGA-180°-Drill-Alu
d1: 17 mm; d2: 18 mm; l1: 121 mm; l2: 71 mm; l3: 49 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-1700-2-4-180HA03-HU630
Order number: 30382990
In Stock
