MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 6.0 Schaftdurchmesser (d2)
- 6xD Bohrtiefe xD
- 5xD Bohrtiefe xD
- 10.0 Schaftdurchmesser (d2)
- 25.0 Bohrtiefe xD
- MEGA-180°-Drill Familie
-
Durchmesser (d1)
-
-
Bohrtiefe (l3)
-
-
Gesamtlänge (l1)
-
-
Schneidenanzahl (z)
-
Kühlmittelzufuhr
-
Produktfamilie
-
Produktklasse
-
Bohrungstoleranz
(51)
(51)
(51)-
MEGA-180°-Drill
d1: 9,7 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0970-2-4-180HA05-HP230
Order number: 30382833
In Stock -
MEGA-180°-Drill
d1: 9,8 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0980-2-4-180HA05-HP230
Order number: 30382834
In Stock -
MEGA-180°-Drill
d1: 9,9 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0990-2-4-180HA05-HP230
Order number: 30382835
In Stock -
MEGA-180°-Drill
d1: 10 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1000-2-4-180HA05-HP230
Order number: 30382836
In Stock -
MEGA-180°-Drill
d1: 5,1 mm; d2: 6 mm; l1: 82 mm; l2: 44 mm; l3: 35 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0510-2-4-180HA05-HP230
Order number: 30382786
currently out of stockInform me when article is back in stock -
MEGA-180°-Drill
d1: 8,8 mm; d2: 10 mm; l1: 103 mm; l2: 61 mm; l3: 49 mm; z: 2; innere Kühlmittelzufuhr; SCD231-0880-2-4-180HA05-HP230
Order number: 30382824
currently out of stockInform me when article is back in stock
