MEGA-180°-Drill
The MEGA-180°-Drill has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 5xD Bohrtiefe xD
- 40xD Bohrtiefe xD
- 12.0 Schaftdurchmesser (d2)
- 16.0 Schaftdurchmesser (d2)
- 6.0 Schaftdurchmesser (d2)
- MEGA-180°-Drill Familie
-
Durchmesser (d1)
-
-
Bohrtiefe (l3)
-
-
Gesamtlänge (l1)
-
-
Schneidenanzahl (z)
-
Kühlmittelzufuhr
-
Produktfamilie
-
Produktklasse
-
Bohrungstoleranz
(52)
(52)
(52)-
MEGA-180°-Drill
d1: 12 mm; d2: 12 mm; l1: 116 mm; l2: 69 mm; l3: 54 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1200-2-4-180HA05-HP230
Order number: 30382858
In Stock -
MEGA-180°-Drill
d1: 14,5 mm; d2: 16 mm; l1: 131 mm; l2: 81 mm; l3: 61 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1450-2-4-180HA05-HP230
Order number: 30382865
In Stock -
MEGA-180°-Drill
d1: 14,8 mm; d2: 16 mm; l1: 131 mm; l2: 81 mm; l3: 61 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1480-2-4-180HA05-HP230
Order number: 30382866
In Stock -
MEGA-180°-Drill
d1: 15 mm; d2: 16 mm; l1: 131 mm; l2: 81 mm; l3: 61 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1500-2-4-180HA05-HP230
Order number: 30382867
In Stock -
MEGA-180°-Drill
d1: 15,5 mm; d2: 16 mm; l1: 131 mm; l2: 81 mm; l3: 61 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1550-2-4-180HA05-HP230
Order number: 30382868
In Stock -
MEGA-180°-Drill
d1: 15,8 mm; d2: 16 mm; l1: 131 mm; l2: 81 mm; l3: 61 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1580-2-4-180HA05-HP230
Order number: 30382869
In Stock -
MEGA-180°-Drill
d1: 16 mm; d2: 16 mm; l1: 131 mm; l2: 81 mm; l3: 61 mm; z: 2; innere Kühlmittelzufuhr; SCD231-1600-2-4-180HA05-HP230
Order number: 30382870
In Stock
