MEGA-180°-Drill-Alu
The MEGA-180°-Drill-Alu has a 180° point angle and a special bevel to produce a flat bore base. Due to its four-bevel geometry and the resulting very good guidance in the bore, the MEGA-180°-Drill-Alu achieves optimum roundness and surfaces in the bores. In addition, polished chip flutes ensure optimum chip transport. The MEGA-180°-Drill-Alu is also suitable for drilling and piloting on inclined surfaces of up to 45°. Due to the flat tip, the radial forces are reduced compared to conventional 140° drill tips.
Selected facets:
- 5xD Bohrtiefe xD
- 20.0 Schaftdurchmesser (d2)
- MEGA-180°-Drill-Alu Familie
- 6.0 Schaftdurchmesser (d2)
- 3xD Bohrtiefe xD
-
Materialeignung
-
Durchmesser (d1)
-
-
Bohrtiefe (l3)
-
-
Gesamtlänge (l1)
-
-
Schneidenanzahl (z)
-
Kühlmittelzufuhr
-
Produktfamilie
-
Produktklasse
-
Bohrungstoleranz
(20)-
MEGA-180°-Drill-Alu
d1: 6 mm; d2: 6 mm; l1: 82 mm; l2: 44 mm; l3: 35 mm; z: 2; innere Kühlmittelzufuhr; SCD241-0600-2-4-180HA05-HU630
Order number: 30383032
In Stock -
MEGA-180°-Drill-Alu
d1: 6 mm; d2: 6 mm; l1: 66 mm; l2: 28 mm; l3: 20 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-0600-2-4-180HA03-HU630
Order number: 30382915
In Stock -
MEGA-180°-Drill-Alu
d1: 15,7 mm; d2: 6 mm; l1: 131 mm; l2: 81 mm; l3: 61 mm; z: 2; innere Kühlmittelzufuhr; SCD241-1570-2-4-180HA05-HU630
Order number: 31237410
In Stock -
MEGA-180°-Drill-Alu
d1: 18,5 mm; d2: 20 mm; l1: 129 mm; l2: 77 mm; l3: 53 mm; z: 2 ; innere Kühlmittelzufuhr; SCD241-1850-2-4-180HA03-HU630
Order number: 30382994
In Stock -
MEGA-180°-Drill-Alu
d1: 20 mm; d2: 20 mm; l1: 151 mm; l2: 99 mm; l3: 75 mm; z: 2; innere Kühlmittelzufuhr; SCD241-2000-2-4-180HA05-HU630
Order number: 30383117
In Stock
