OptiMill®-3D-HF-Hardened
The OptiMill®-3D-HF-Hardened high feed milling cutter was specially developed for roughing and finishing hardened components with a hardness of up to 66 HRC. Due to the innovative face geometry, the milling cutter achieves very high surface qualities even with interrupted cutting.
Selected facets:
Remove all filters-
Fräsertyp
-
Durchmesser (d1)
-
-
Gesamtlänge (l1)
-
-
Schneidkantenlänge (l2)
-
-
Halslänge (l3)
-
-
Schneidenanzahl (z)
-
Schaftform
-
Kühlmittelzufuhr
-
Produktfamilie
-
Produktklasse
(6)
(6)
(6)-
OptiMill®-3D-HF-Hardened
l1: 50 mm; l2: 2 mm; l3: 6 mm; d1: 2 mm; d2: 4 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-0600X050-HP810
Order number: 31150940
In Stock -
OptiMill®-3D-HF-Hardened
l1: 50 mm; l2: 2 mm; l3: 10 mm; d1: 2 mm; d2: 4 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-1000X050-HP810
Order number: 31150941
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 2 mm; l3: 6 mm; d1: 2 mm; d2: 6 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-0600X060-HP810
Order number: 31150942
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 2 mm; l3: 10 mm; d1: 2 mm; d2: 6 mm; R: 0,1 mm; z: 4 ; MHF102-020-0180-1000X060-HP810
Order number: 31150943
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 5 mm; l3: 15 mm; d1: 5 mm; d2: 6 mm; R: 0,25 mm; z: 4 ; MHF102-050-0460-1500X060-HP810
Order number: 31150950
In Stock -
OptiMill®-3D-HF-Hardened
l1: 60 mm; l2: 5 mm; l3: 20 mm; d1: 5 mm; d2: 6 mm; R: 0,25 mm; z: 4 ; MHF102-050-0460-2000X060-HP810
Order number: 31150951
In Stock
